1、GIT-200 series is compact-sized manual swipe type card reader with USB.GIT-200 design as a HID device , so not required driver.
2、 SYSTEM BLOCK DIAGRAM
IBM PC/ AT or Compatible
GIT-200
3. SPECIFICATIONS
3.1 Card Standards

Card Standard ISO 7811
Track No. I (IATA) II (ABA) III (MINTS)
Reading Method F2F (FM)
Recording Density 210 BPI 75 BPI 210 BPI
Recording Capacity 79 Characters
(7-bit code) 40 Characters
(5-bit code) 107 Characters
(5-bit code)
Card Thickness 0.760.08 mm


3.2 Environmental Requirements
·Ambient Temperature
- Storage : -20 C to +70 C
- Operating : 0 C to +50 C

·Ambient Relative Humidity
- Storage : 0 to 95%
- Operating : 20 to 90%

3.3 Physical Characteristics
Dimensions : 90 mm ( D ) X 27 mm ( W ) X 28 mm ( H )
Weight : Approx. 76g
Power Supply : 5 VDC ( Supplied from the host computer )
Current : Less than 27mA
Operating Locus : Indoor only

3.4 Operational Characteristics
·Card Feeding Speed : 10 to 160 cm/sec
·Head life time : Approximately 500,000 passes

3.5 Jitters
·Less than 20%

4. DATA FORMAT (Custom available)
4.1 Basic Format : Data + CR
·Track ID + Data + CR (0DH)

4.2 Track identification character :
·Track I : ' % ' (25H)
·Track II : ' ; ' (3BH)
·Track III : ' + ' (2BH)

4.3. Tranasmission Dta Format
·Track #1 (Track ID + Data + CR) + Track #2 (Track ID + Data + CR)+ Track #3(Track ID + Data + CR)
Read error :
·Track ID + ' E '(45H) + CR

5. SIGNAL CABLE SPECIFICATION
Standard Langth : 1500mm